| previous | ||
|
Naval Non-Leaded C464 |
 |
|
|
|
||
| Principal Design Features | Brasses (Copper-Zinc-Tin), Naval Brass, Uninhibited. Excellent hot forgeability, good corrosion resistance. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Applications |
Used for fasteners and hardware for corrosion resistant service, including marine applications. Also used for high strength cold headed products.
|
|
|
|
Machinability |
|
The machinability rating of this alloy is 30. (Where Alloy 360 FC Brass is 100).
|
|
|
|
Forming |
|
"" |
|
|
|
Welding |
|
Soldering is rated as "excellent", brazing is rated as "excellent", oxyacetylene welding is rated as "good", gas shielded arc welding is rated as "fair", coated metal arc welding is "not recommended", spot welding is rated as "good", seam welding is rated as "fair", and butt welding is rated as "good". |
|
|
|
Heat Treatment |
|
"" |
|
|
|
Forging |
|
The hot forgeability rating of this alloy is 90. (Forging Brass=100). The recommended hot working temperature for this alloy is between 1200 and 1500. |
|
|
|
Hot Working |
|
This alloy's capacity for being hot formed is rated as "excellent". |
|
|
|
Cold Working |
|
The capacity for cold working this alloy is rated as "fair". |
|
|
|
Annealing |
|
The annealing temperature for this alloy is between 800 and 1100 F. |
|
|
|
Aging |
|
"" |
|
|
|
Tempering |
|
Not applicable. |
|
|
|
Hardening |
|
"" |
|
|
|
Other Physical Props |
|
"" |
|
|
|
Other Mechanical Props |
|
"" |
|
|
|
Mechanical Data |
|
There is no Mechnical data available for this grade. |
|
|
|
|
|
Disclaimer |
This information is provided "as is" and TriMatic Machine Products,Inc. makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. TMMPI specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose. In no event shall TMMPI be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein. This data may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
|
Provided by AlloyTech, Inc. All Rights Reserved | ||||||||||||||||||||||||||||||||||||||||||